Bicycle Wheel / Hub Shipping Protector - 10 / 15 mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shipping protector for wheels and hubs with 10mm solid axles or 15 mm thru axles
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Shipping protector for wheels and hubs with 10mm solid axles or 15 mm thru axles.
The fit should be tight enough that you need to thread the protector onto a 10mm axle, but should go on easily. It should have a very light press fit into a 15mm hub. I haven't had it pull then endcap out on any yet, but it's certainly possible if your endcaps come off easily.
The model tapers from 15.2mm at the flange to 15mm where it would enter the hub, so should accommodate most 15mm hubs.
I've been using PETG-GF with great results. I expect regular PETG would also be fine. TPU could likely be even better, but I can't be bothered.