GEPRC Taker G4 45A AIO Flight Controller — CAD Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dimension-accurate CAD of the GEPRC Taker G4 45A AIO flight controller. STEP, STL and editable Shapr3D files.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
What it is
A dimension-accurate CAD model of the GEPRC Taker G4 45A AIO (flight controller and 4-in-1 ESC on one board), modeled from the real board. Outline, thickness, mounting holes and the side-offset USB-C port are accurate; not every chip is modeled.
What it is for
Design frames, covers and mounts around the board and check fit before you print. It is the board inside my 3-Inch Toothpick Drone Frame v8.
Specs
Board: 33.8 × 34.1 mm, 1.76 mm thick
Mounting: 25.5 × 25.5 mm, M2
Weight: 9 g
MCU STM32G473 · gyro ICM-42688-P
ESC: 45A continuous, 8-bit, 2–6S · BEC 5 V 3 A
Files
.shapr (editable) · .step · .stl
Links
Exact board: GetFPV
Also on Amazon (affiliate; Amazon may only carry the 35A version)
Used in: 3-Inch Toothpick Drone Frame v8
Modeled in: Shapr3D (affiliate)
License
CC BY 4.0. Use it, remix it, share it, sell it. Just credit @shreyashgupta.
Disclosure
I am a Shapr3D Creator Partner and an Amazon Associate. I earn from qualifying purchases at no extra cost to you.