Beyblade X JD3 Overhand Grip - Entry Proto Launcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An Overhand Grip for the Beyblade X Entry/Proto Launcher
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
An Overhand Grip for the Beyblade X Entry/Proto Launcher.
Loosely based on Ragidd＆Junk_tools_village's Beyblade X Sword/Hold Launcher Grip /Dual Launcher MOD.
The Base Shape files are included for ease of Edits and Remixes.
Part of the JD3 Series 1
Print Settings
These were the print settings used for test prints on TPU, increasing or decreasing infill may lead in a desired stiffer or softer grip.
Note 1: Higher infill settings or using PLA may be recommended for this one.
Recommended Material: TPU, PLA
Walls: 2 at .4mm/ea
Infill: 15% Honeycomb
Sources
Original Lock Part:
Source
Additional Grips to try in this style:
Beyblade X - Winder Launcher Geartooth Grip(s) by donutcat
Beyblade X - Entry Launcher Grip by donutcat
Beyblade X Fidget Launcher Grip by Bengialp Evren
Beyblade X Winder/Ripcord Launcher Side Grip by TuppuP