1 / 2
MTG Treasure Token Chest — print-in-place pirate chest counter (1-6) — zdjęcie 1
1 / 2

MTG Treasure Token Chest — print-in-place pirate chest counter (1-6)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A working pirate chest that IS your MTG Treasure counter: friction-fit gold coins stand edge-up in six slots and the…

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
102
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A pirate treasure chest that doubles as a working MTG Treasure-token counter. Up to six gold coins friction-fit edge-up into slots in the chest, and the number of coins standing is your Treasure count (1–6) — drop a coin in when you make a Treasure, pull one out (the reeded edge gives you grip) when you crack it for mana. Engraved digits sit in front of each slot.

It really opens and closes — print-in-place. The barrel-dome lid rides on a captive piano hinge (Ø3 mm pin fused to the body knuckles, Ø7 mm knuckles), so it prints as one piece, lid open, no supports, and flexes free off the bed. The lid is hollow, so the chest closes with all six coins seated inside.

Also a loot chest for adventurers. The download includes a second coin set stamped with a brand-neutral faceted gem instead of the mana glyph — so the exact same chest becomes a gold / treasure / loot tracker for D&D, dungeon crawlers or any tabletop game. Print whichever coin you like; they're the same Ø16 × 3 mm coin and drop into the same slots.

What's in the box:

  • treasure_chest.stl — the chest with its print-in-place hinged lid (print this).

  • coins.stl — an 8-coin plate of MTG {1} Treasure coins (6 + 2 spares).

  • coin.stl — a single MTG coin.

  • coins_breach.stl — an 8-coin plate of neutral GEM loot coins (D&D / Breach / any crawler).

  • coin_breach.stl — a single gem coin.

  • treasure_chest.scad — full parametric source. The chest body and hinge are shared; only the loose coin's stamped face changes (coin_face = "mana" or "gem").

Print:

  • Chest: lay flat exactly as exported (part="chest"), no supports, no brim. After printing, flex the lid once to free the hinge.

  • Coins: print on the flat plate in gold (or any metallic) PLA. Single colour. The reeded edge is your grip for lifting a coin back out.

  • Chest ≈ 52 × 34 × 24 mm; coins Ø16 × 3 mm.

Tagi