Bevel spacer for flexispot desk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fit anything with a clamp to the 45 degree, 17mm deep bevel on flexispot beveled desk surfaces
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Fit anything with a clamp to the 45 degree, 17mm deep bevel on flexispot beveled desk surfaces. Wide enough for all of my wife's accessories, meant to be a minimal profile but extend deep enough into the desk for a stable clamping surface. Sticks out of desk edge about 1mm which should help protect desk edge against any C clamp designs with a backer. This can easily be sanded off if you want, or remixed.
Thought those who don't CAD might appreciate this. The ones for other desks are the wrong angle (most bevels are 15-20 degrees, maybe 30 degrees at most).
Recommend 5 walls, 80% infill 3D honeycomb (cubic/gyroid are also generally strong in multiple dimensions) with at least 5 bottom layers, 0.2mm layer height. This is meant to be a structural part and if your bottom layers are too thin your clamps will crack straight through. For that reason recommend a non brittle, strong material like nylon but PETG will work -- would recommend more bottom layers in that case though.