1 / 1
BT4 Rental Paintball tracer ball detent — zdjęcie 1

BT4 Rental Paintball tracer ball detent

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ball detent for the BT4 Rental paintball tracer. Piece #19386. Number 5 on exploded view of the manual

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
39
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

So, I got a BT4 rental paintball tracer which had been store for 20 plus years, all the orings where gone and the ball detent literally desintegrated in my hand. I cleaned it up, changed the orings, oiled it up and it was working great, but the balls kept falling out of the barrel because there was no ball detent.

I found a top view photo of the piece and model it from there.

Printed it with 0.2 layer height and 0.4 nozzle with CR TPU Shore 95A.

There are two files because the first one, the full one, was too stiff and would add to much resistance to the mechanism, not allowing to fully blow back and lock on the trigger and causing runaway. So i modeled it so the wings were hollow and thinner to make it more flexible. If you have a softer TPU that would work too probably.

Tagi