Heicko B24-4013-M Motor Mount Adapter (Screen / Roller Shutter Mod)

When upgrading or repairing a roller screen or shutter with a Heicko B24-4013-M Tubular Motor (13 Nm, max. 29 kg, for 40 mm octagonal shaft), the included metal hardware doesn't always line up perfectly with the existing side brackets of the housing.

This custom-designed adapter acts as a structural spacer and mounting interface. It allows you to securely attach the Heicko motor's metal U-bracket to the original white side-plate of your screen housing, ensuring proper alignment, secure torque transfer, and safe cable routing.

Features:

• Custom fit for the Heicko B24-4013-M motor hardware.

• Adapts the standard motor U-bracket to legacy screen housing brackets.

• Recessed screw holes to keep the mounting face flush.

• Provides adequate clearance for the motor's power cable.

Print Settings

Since this part is under constant load (handling up to 13Nm of torque) and will likely be exposed to fluctuating temperatures near a window, strong materials and high-density print settings are highly recommended.

• Material: PETG, ASA, or ABS (Avoid PLA as it may creep or deform under tension and summer heat).

• Layer Height: 0.2mm

• Infill: 50% - 70% (Gyroid or Cubic for multidirectional strength)

• Perimeters/Walls: 4 to 6 (Crucial for the strength of the screw holes)

• Top/Bottom Solid Layers: 5+

• Supports: None required if printed flat.

Hardware Required

• 1x Heicko B24-4013-M Tubular Motor & included U-bracket.

• Countersunk machine screws/nuts to secure the adapter to the original white housing plate.

• Machine screws with locking nuts to attach the U-bracket to the printed adapter.