1 / 1
Dummy taillight to fit Vespa PX150 — zdjęcie 1

Dummy taillight to fit Vespa PX150

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Can't stop, shan't stop!

Ocena
0 / 5
Polubienia
2
Pobrania
10
Wydruki
0
Wyświetlenia
76
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Dummy taillight to fit Vespa PX150 and its clones, anything with 95mm on center bolt holes.  Modeled after the '60s Vespa "Acorn" taillights but not really a reproduction of anything specific.  Probably don't want this on a street bike unless you like ambulance rides.

I uploaded two versions, one is partially hollowed out.  It's also sillier.  The other is solid.  The solid one probably makes more sense if weight saving is the goal since it can be printed with minimum walls and infill to have more hollow than the hollow model.  Holla!

Update! I added two more variations.  Thinner Acorn is smaller to use less material and is in two pieces so it can be printed without supports.  Square is a really simple squared dummy that should be really easy to print, and its hollow so you can hide candy and stuff inside it.

One more update!  Acorn_cheaper has been tweaked to give the cheapest estimate at a 3d printing service.  Its slimmer and flat faced and hollow!

Tagi