ZK-1602T Amp case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
This model is a WIP.
Modeled around the ZK-1602T amplifier for case speaker enclosures.
Assembled with the provided hardware that comes with the amplifer itself.
The small holes on the base plate is used for the female/male post to be heat set into with the threaded male part sticking out. Then the larger dual female threaded spacer to mount the amplifier to the base plate.
make sure to set the base plate threads straight to line up with top screw holes*
Top cover gets screw onto the four spacer with the provided screw.
V. 2 is available but V.3 is a much better fit for the amplifier.
Print as the file comes for best results. Supports are needeed for rear overhangs.