Linus Designs Micro Monitors V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pair of small passive bi-ampable bookshelf/desktop speakers
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Micro Monitors V1 — Full Component & Hardware Bill of Materials
Test video: https://www.reddit.com/r/diyaudio/s/QxL9G90VEA
Printed mine with 25% infill, 3wall loops and top/bottom layers and support where needed, mid pods was printed face down with tree supports
Speakers drivers:
Midrange Drivers (2x): https://a.aliexpress.com/_EIEbLIw — 4Ω 20W
Tweeters (2x):
Metal Dome: https://a.aliexpress.com/_Ew3dNFM
Fabric/Silk Dome: https://a.aliexpress.com/_EzgraVy
Woofers/Subwoofers (2x):
Neo: https://a.aliexpress.com/_EHrkK8S
Ferrite: https://a.aliexpress.com/_EJRFd78
Crossovers & Electronics Components
Woofer Crossovers (2x): https://a.aliexpress.com/_ExRlbWw
Mid/Tweeter crossovers (2x): https://a.aliexpress.com/_ExDc5dC
5Ω 5W Resistors (4x): https://www.conrad.se/sv/p/tru-components-tc-prw05wjw50jb00203-hoglastmotstand-5-axial-hallmonterade-5-w-1-st-1585490.html
Replacement 220μh Inductors for Midrange (2x): https://www.conrad.se/sv/p/tru-components-toi-15-6-221kv-drossel-radialt-hallmonterade-rund-220-h-2-8-a-1-st-1564345.html
Replacement Capacitors for Midrange (2x): https://a.aliexpress.com/_EwEqWtk
2.1 DSP Amplifier (Optional): https://a.aliexpress.com/_Ev5VpCe
Hardware & Assembly Materials (Per Enclosure speaker)
Foam Gasket Tape (10x1mm): https://a.aliexpress.com/_EGrCjzs
32x M3x5x4.5mm inserts per speaker cabinet: https://a.aliexpress.com/_EJfzcYi
32x M3x16 and 4-8x M3x5 screws per speaker cabinet: https://a.aliexpress.com/_Ey3EVww
Speaker Terminals (4x): https://a.aliexpress.com/_EjjGtMe
Polyfill: 25 grams for the cabinet volume and optionally 2.5 grams per midrange pod. (Source locally)
Wire 2 of the 4 5Ω resistors in parallel for 2.5Ω and then wire that in parallel with the tweeter, for the mid/high Crossovers, remove the jumper that goes across the bass cut capacitor, keep the one for the tweeters
If anything returns a 404, let me know and I'll see if I can find alternative links, these all work in Sweden
CCAN Licence due to use of Rostex font on the rear panel emblem