1 / 6
oil injector for Ameraex brand fire extinguisher — zdjęcie 1
1 / 6

oil injector for Ameraex brand fire extinguisher

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

oil injector for Ameraex brand fire extinguisher

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Open Community License v1

This turns a old (junk) Ameraex brand fire extinguisher into a oil injector. Its used to fill a tank that is slow to fill with a funnel (like a hydraulic tank on a pallet jack).  You add fluid to the tank and add LOW pressure to the port without the hose to push fluid threw the hose to the tank you want to fill.

You will need a o-ring for the fitting to seal 100%, you will also want to regulate the air pressure, or restrict the air flow with a plug and the smallest drill bit you have(see pic).

This is just like my over version for Kidde fire extinguishers, but it is not the same threads or size fitting.

might want to look at 

Tagi