MJÖLNIR the godly hammer battle top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a battle top designed for arena combat.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Settings
Blades: print with 80% infill and three walls without brim.
Hammer launcher: print with three walls and 40% infill with brim.
Lower part: print with 60% infill and five walls with brim.
Upper part: print with 30% infill and three walls with brim.
Ripcord: print with full infill and no brim.
Thread: print with full infill with brim and 0.1mm layer.
Functionality
Place the folded battletop into the hammer launcher, insert the ripcord, pull, and just wait for the battletop to defeat your opponent.
Notes
If you want to use the battletop without the blade, print thread 2.
The average spinning time for a spin with a blade is 30s, without a blade it is 1min and 48s, and with a thor plate blade it is 2min and 13s.
Instructions
Take the lower and upper parts and the blade and tighten them together using thread.