Bambu 257mm build plate hanger for Ikea Jonaxel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple hanger to put on Ikea Jonaxel frames ~15.2mm. Mild elephant theme.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a way to store my spare build plate next to the printer and the existing designs were fairly complicated and material intensive.
Lots of potential improvements on this idea but this one works for me. It should probably have some way to lock it in place and the angle/thickness/curvature of the trunk can probably be tweaked. I made it less wide than the cutout in the build plate so you don't have to line up the plate much to hook it on. I printed in PETG but PLA should be fine too as long as you don't put hot build plates on it.