Lid for 67mm diameter tuna cans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable storage lid for 67mm tuna cans. Turn empty cans into workshop organizers. Prints at 0.2mm, no supports.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 39
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview
Don't throw away your empty tuna cans. This utility lid converts empty 67.00 mm diameter cans into robust, interlocking storage bins for screws, resistors, hardware, or small parts. The design features a recessed top profile, making the modified cans fully stackable to maximize vertical space on your workbench.
Print Settings
Material: PLA
Layer Height: 0.2 mm
Supports: None / No supports needed
Infill: 15% – 20%
Features
Upcycling: Easily repurpose standard 67mm tin cans for workshop or garage organization.
Interlocking Stackability: The lid profile nests securely into the bottom rim of the next can above it.
Print-and-Go: Designed with clean angles to print completely flat without any support material.