1 / 3
Sovol SH01 Filament Dryer Slim Inside Valve Body — zdjęcie 1
1 / 3

Sovol SH01 Filament Dryer Slim Inside Valve Body

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A slimmer inside valve body for the Sovol SH01. Based on the design by Hunter Rodrigez

Ocena
4 / 5
Polubienia
4
Pobrania
11
Wydruki
0
Wyświetlenia
65
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I printed one of the valves from Hunter Rodrigez, and mounted it the top of my Sovol SH01 lid, in the exact middle, only to realise that I was then unable to close the lid of the box, due to clearance issues.

I took some measurements off the original, and redrew the inside portion of the valve to have a lower profile and allow lid closure.

Tagi