Nadir @ CN3D V5 Tollhead Modifications For EBB42 Gen2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EBB42 Gen2 adapter: integrated extruder+bracket, 6mm rear clearance, +5mm height in cover & strain relief.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Remix of the V5 Toolhead adapted for BTT EBB42 Gen 2. Gen 2 is 5mm taller than Gen 1 and has larger components on the rear face. First time using Fusion 360 — I did my best but the design may not be optimal. Feedback welcome!
Changes:
Extruder body and EBB bracket integrated into a single part with 6mm rear clearance for back-side components
Strain relief and front face cover updated to match the 5mm height increase.
Disclaimer: Parts were test-fitted in PLA. I don't have an ABS printer so I'm waiting on final printed parts — the toolhead has not been fully assembled yet. It should work based on the test fits, I'll update once I have the toolhead built if there's any change needed, use at your own risk.
Updates:
2026-06-23: Updated extruder main body to v1.1 moving the EBB42 bottom mounting point to the left because it was blocking the idler door pin insertion.
2026-08-15: Updated extruder main body to v2.0 removing the need for orbiter metal filament guide by adding the filament path to the design itself. This also allows us to reinforce hotend mount that some comments mentioned it snaps as we no longer need space to insert that part.