1 / 2
bird toy spinning treat wheel/play and enrichment — zdjęcie 1
1 / 2

bird toy spinning treat wheel/play and enrichment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This model prints a fun toy for birds to play with and enjoy.

Ocena
0 / 5
Polubienia
13
Pobrania
53
Wydruki
0
Wyświetlenia
249
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution

This model is a fun, fully printed bird toy that features a spinning wheel to hold your birds favorite treats!

directions:

First, download the model and print all the parts. Then use a small bit of Elmers, super glue, hot glue, (your preference) to glue the flat circular piece on to the main circular piece. finally glue all the base pieces together including the screw.

print setting: 

  • layer height: 0.2mm

  • infill: 15% (mainly preference)

  • supports: none

  • wall count: 3

  • assembly: yes

  • scaling: fine

I hope you enjoy this model! please remember to rate and post your make, thanks!

Tagi