Antique Light Switch Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A decorative light switch cover designed to fit vintage push-button light switches.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Summary:
This cover was designed for an older home that retains its original 1930s-era push button light switch. A future revision is planned to adapt the design for modern light switches as this should be a straightforward modification. The circular openings need to be converted to slots compatible with a standard dual toggle switch.
Features:
Precisely fits vintage push button light switches from the 1930s
Elegant, stylized design that complements and enhances the character of a historic home
Print Parameters:
Material: Polymaker PLA Pro
Nozzle: 0.4mm @ 225°C
Bed: PEI @ 60°C
Layer Height: 0.2mm
Supports: None
Infill: 20% Cubic (for testing purposes)
Note: While this model has been successfully printed previously, reference photos are not currently available. This is a straightforward print and it is recommended to place the finished face down on the print bed for best results.
Products:
Disclaimer:
Links may take you to Amazon or Prusa.com for products I endorse and use on a regular basis.
JD3D is not responsible for any damage or harm caused by improper production, assembly and use.