Tripod Quick Release Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick release mounts for tripods with either 35mm or 44mm quick release mounts.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
These quick release mounts for tripods are available in 35mm and 44mm.
Required hardware:
I recommend a D Shaft D-Ring 1/4" Tripod Screw Adapter
Printing recommendations:
You can print the top and bottom independently and glue them together after, or you can print them as one part with a multi material printer. I designed this with putting the Snapmaker U1 to the test in mind, printing the body in PETG, printing the supports in PLA, and printing the grip in TPU.
I highly recommend using the following settings:
Scarf Joint: Contour and Hole
Ironing Type: All top surfaces
4 walls
For multi-filament printers:
Normal auto supports
Set Support/raft base to your primary filament for the body
Set Support/raft interface to the opposite type of plastic (PETG / PLA)
Enable Ironing Support Interface
Set Top Z to 0
Set Top interface layers to 4
For multi head printers:
Set Filament for Features > Wipe Tower to your primary plastic
Use beam interlocking