Snap-On TK72 Stubby Ratchet 1/4" Drive Handle (vert-print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-On TK72 Stubby Ratchet 1/4" Drive Handle (vert-print)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
Snap-On TK72 Stubby Ratchet 1/4" Drive Handle (vert-print)
I picked up this new stubby 1/4" Snap-On Ratchet (model TK72) from my local Snap-On dealer. I like the small size, but wanted something to help identify it in my toolbox, and keep it from getting lost. I think this makes a great tool even better.
https://sep.snapon.com/product/TK72
I took the original design and I made it into a stubby handle. I sliced it in half, added plastic dowel pins and removed material for the ratchet metal handle.
I printed it in a vertical orientation, but next time will print horizontal.
Hope you get as much use out of this as I am.
I glued the handles together with the 3d printed plastic dowel pins with Gorilla Glue Clear.
https://www.homedepot.com/p/Gorilla-1-75-oz-Clear-Glue-4500100/301050930
Printed in PLA, but PETG or PCTG would also probably work.
Clamp together for a few hours until glue setup in place.
I used 3D Fuel Tough Pro PLA+.
https://www.3dfuel.com/products/pro-pla-filament-lulzbot-green-1-75mm