DarkFlo Mini v3 Case (Modified JCMKK Mini v3 Case)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified JCMKK's Mini v3 case and added some additional features that I wanted for myself.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
I modified JCMKK's Mini v3 case.
Added 3mm in depth for magsafe compatibility.
Added 4mm in width to hide more of the microSD card (added 2mm to each side to keep it symmetrical)
Made the hole for the power switch bigger to accommodate the extra width.
Positioned the holes for the antennas so that the GPS antenna would be centered instead of hanging off on one side.
I purchased a magnetic ring from amazon and modified it by cutting to ensure proper fit within the compact enclosure, as illustrated below. Printing must be paused at a height of 3.6 mm to allow for insertion of the magnet, enabling its embedding within the 3D-printed case.
Use the 5 magnetic pieces from the top and the 5 magnetic pieces from the bottom. They can be easily cut using some shears.
Might be a good idea to add a little glue when inserting the magnets to avoid the printhead from attaching itself to the magnets.
Parts & Tools used: