Weekly Pill Organizer, 3 Times a Day
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple weekly pill case set for organizing medication or supplements by day and time of day. Each box has three compar
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Description:
This is a printable weekly pill organizer designed for daily medication, vitamins, or supplements. Each day has its own separate case, and every case is divided into three sections for taking pills three times per day. The lids are designed with simple printed hinges. Instead of metal rods or screws, the hinge pins are made from small pieces of standard 1.75 mm filament. Just cut the filament to length, slide it through the hinge holes, and the lids can open and close normally. Shockingly, the thing your printer eats can also hold the thing your pills live in. Efficient little plastic ecosystem. The day labels are printed directly on the cases, making it easy to organize the whole week. The design is simple, compact, and useful for travel, home use, or keeping medication sorted in advance.
Features:
Separate case for each day of the week
Three compartments per day
Designed for morning, midday, and evening pills
Hinged lids
Uses 1.75 mm filament pieces as hinge pins
No screws or extra hardware required
Easy to print and assemble
Compact and practical design
Assembly:
After printing, clean any small stringing or elephant foot around the hinge area. Cut short pieces of 1.75 mm filament to use as hinge pins. Align the lid hinges with the body hinges, then carefully push the filament through the hinge holes. Trim the ends if needed. If the hinge is too tight, gently move the lid back and forth a few times or lightly clean the hinge holes with a small drill bit or needle. Do not force it like a barbarian with a toolbox.
Recommended print settings:
Layer height: 0.16 mm or 0.2 mm
Nozzle: 0.4 mm
Walls: 2–3
Infill: 15%
Supports: depending on orientation
Material: PLA, PETG, or similar
Filament for hinge pins: 1.75 mm filament
Notes:
For pills or supplements, use clean filament and keep the printed parts clean before use. PLA is usually fine for basic dry storage, but PETG may be better if you want a slightly tougher and more durable case. This model is not intended to be waterproof or child-resistant. Keep medication safely stored and away from children.