MR2 Spyder NavPod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This NavPod is used to relocate an aftermarket HU to an easier Field of View, still small enough to not being in the way
- Ocena
- 4,25 / 5
- Polubienia
- 24
- Pobrania
- 699
- Wydruki
- 4
- Wyświetlenia
- 4087
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is better printed in ABS/ASA to whitstand the heat, it is designed to be wrapped either in fabric or vinyl. A printer with a 250 size bed is needed all parts can be printed without any support altough brim is recommended for some.
Keep in mind this might not fit your HU and even if it does you might need to adapt the Brackets to yours. Here is a similar one to the one this was based on (this is an update to the one I bought I think measurements should remain the same):
https://fr.aliexpress.com/item/4000549367340.html?gatewayAdapt=glo2fra&spm=a2g0o.order_list.0.0.22a41802rHhE7o