Power Rangers Ninja Storm Storm Striker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Power Rangers Ninja Storm Ninja/Ninpu Sentai Hurricaneger prop
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I have no printing or assembly instructions for this. I haven't printed this version and it's mostly for figure customizers that want the full Storm Striker in different configurations. I can't guarantee it's ability to print.
The three configurations (according to the ranger wiki) are Striker Red, Striker Blue, and Striker Yellow.
If you choose to print this in full scale then you'll need to slice it and add supports throughout. No promises, but let me know if you run into any issues. I may be able to make alterations to the model.
Good luck, have fun
Striker Red:
Length: ~35 inches (895 mm)
Striker Blue:
Length: ~36 inches (~903 mm)
Striker Yellow:
Length: ~39 inches (994 mm)
The height for all configurations comes is ~13 inches (~315 mm)