1 / 1
Cthulhubenchy: ph'nglui mglw'nafh... it floats — zdjęcie 1

Cthulhubenchy: ph'nglui mglw'nafh... it floats

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sunken temple, eyes everywhere, tentacles squeezing the hull. Creepier than dinner with the in-laws.

Ocena
0 / 5
Polubienia
12
Pobrania
27
Wydruki
0
Wyświetlenia
88
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Some people print a regular Benchy, and some people prefer to summon a cosmic entity that's been sleeping for millennia at the bottom of the ocean and turn it into a centerpiece. Guess which category this falls into.

The hull is what remains of a sunken, crumbling temple, with arches worn down by time (and possibly by something else) that vaguely recall R'lyeh, the non-Euclidean city that, according to Lovecraft, would drive anyone mad just by looking at it too long, kind of like reading IKEA instructions. Dozens of unsettling eyes poke out from the stone, because apparently Cthulhu likes to keep an eye on everything, quite literally, from every angle.

The tentacles wrap around the hull as if they're about to drag it down into the abyss any second now, while the chimney has been replaced by an upright tentacle dripping a bioluminescent blue-purple substance, because a regular chimney would have looked like a complete extra here.

🧩 Print Specifications

  • Model height: 150mm (taller than the stack of forbidden Necronomicon volumes)

  • Layer height: 0.16 mm (more precise than the cult that's been waiting for Cthulhu's awakening for generations)

  • Infill: 10% Lightning (hollow inside like the sanity of anyone who stares at these eyes too long)

  • Supports: yes (even the Great Old Ones need a prop now and then)

  • Brim: optional (just to make sure nothing wakes up ahead of schedule)

  • Material: PLA matte white (later transformed into ancient stone and slimy tentacles)

  • Print time: about 13 hours (way less than the millennia Cthulhu has spent waiting)

  • PLA used: about 200 g (light in weight, but carries some serious existential dread)

🖌 Recommended painting technique

after applying the spray primer, lay down a light grey/off-white base coat with acrylic marker over the entire stone structure, then apply a diluted dark grey/black wash to bring out the cracks and engraved details in the arches. The tentacles should be painted with a bright purple-to-blue gradient: apply purple as the base color, then blend toward turquoise/blue at the tips with a second marker, smoothing the transition with a damp brush while still wet. The eyes should be painted with an electric blue base and black pupil, finished with a small white dot for the highlight. For the substance dripping from the tentacle-chimney, use a semi-transparent turquoise acrylic with a final touch of gloss/UV resin only on those drips, for that bioluminescent, slimy effect.

Print it, paint it, and if you start dreaming about non-Euclidean cities, maybe ease up on the UV resin.

Tagi