Going Benchy: Luffy would've stolen it on sight

Every great pirate needs a ship worthy of the name, and this Benchy has earned its right to sail the Grand Line. Directly inspired by the iconic ship of the Straw Hat crew, this model proudly carries a curly, proud ram-shaped figurehead at the bow, ready to lead the crew toward the next mysterious island (or the next disaster, which for them seem to be pretty much the same thing).

The wooden cabin with silver details closely echoes the bridge of the original ship, complete with a golden porthole and an arched doorway, while the main sail proudly displays the crew's Jolly Roger: a skull wearing a straw hat, because a real pirate has to be recognizable from a distance, ideally before the Navy notices.

At the top of the mast flies the small black flag, tiny but accurate down to the details, while a carved anchor and knotted ropes complete the charm of this hull, which looks like it sailed straight out of a manga page.

🧩 Print Specifications

• Model height: 150mm (taller than the bounty poster put on Luffy's head at the start of the series)

• Layer height: 0.16 mm (more precise than Zoro's three-sword strike, and he uses one with his mouth)

• Infill: 10% Lightning (hollow inside like Luffy's stomach two minutes after eating)

• Supports: yes (even the strongest crew needs a helping hand sometimes)

• Brim: optional (just to keep the base from running off like Usopp at the first sign of danger)

• Material: PLA matte white (later painted in the warm tones of wood and adventure)

• Print time: about 7 hours (way less time than it takes the series to reach a new saga)

• PLA used: about 115 g (light in weight, but loaded with dreams of freedom, as someone would say)

🖌 Recommended painting technique

after applying the spray primer, lay down a light/medium wood-brown base coat with acrylic marker over the entire hull, followed by a dry brushing pass with dark brown along the grain lines to simulate wooden planks. The white-silver details (trim, figurehead, railings) should be painted with a cream white slightly dirtied with light grey. The sail stays white/cream, with the Jolly Roger hand-painted using black for the skull and bones, and red/yellow for the straw hat, using a fine-tip marker for the small details. The metal details (anchor, rings, nails) go in matte dark grey/black, with a very light silver dry brushing pass to simulate the metal's shine.

Print it, paint it, and hoist the flag: as of today, your desk is officially part of the crew.