Origamibenchy: the paper boat you folded as a kid, but all grown up
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No glue, no scissors, just perfect folds. Tidier than your desk.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Some people fold a sheet of A4 paper and end up with a crooked little boat that sinks the second it touches the water in the sink, and some people take that same idea and turn it into a full Benchy, complete with cabin, chimney and geometric details worthy of a true origami master (the skilled kind, not the kindergarten kind).
Every surface of this model is a flat facet with crisp, visible fold lines, just like a real hand-folded sheet of paper. No soft curves here: everything is angular, geometric, essential, right down to the smallest detail. The cabin is built as a perfectly squared box volume, while the chimney follows the same logic with stacked, clean-edged sections.
A small blue sail pokes out on the side, the only splash of color in a sea of cream white, a reminder that even the simplest piece of paper can hide an unexpected detail, kind of like when you finally nail the perfect origami fold after ten failed attempts.
🧩 Print Specifications
Model height: 150mm (taller than the pile of wasted sheets before you got the fold right)
Layer height: 0.16 mm (more precise than a 45-degree fold made with your fingernail)
Infill: 10% Lightning (hollow inside like a sheet of paper, but a lot sturdier)
Supports: yes (even the stiffest paper sometimes needs a little support)
Brim: optional (just to keep the base from flying off with the first gust of wind)
Material: PLA matte white (already perfect as is, looks like real paper even unpainted)
Print time: about 8 hours (way less time than it takes to understand an origami tutorial on YouTube)
PLA used: about 170 g (light as an actual folded sheet, but it won't crumple)
🖌 Recommended painting technique
this is the only model in the series that works perfectly even unpainted, leaving the original matte white PLA to get that natural paper effect. If you still want to add something, keep it to small, targeted touches: go over the fold lines with a light graphite pencil or a light grey marker to bring out the fold shadows, and color only the small side sail with a bright matte blue using a fine-tip acrylic marker. Absolutely avoid glossy or textured finishes: all the beauty of this model lies in the simplicity of the flat surfaces and the sharp contrast of the folds.
Print it, don't paint it (or barely), and put it on display: proof that simplicity always beats complication.