Lid Rest with Bowden Pass Through for PFTE Tubes and Filament MMU3 Multi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIY Enclosure, filament passes through cleanly and unexposed also it acts as a lid rest for the enclosure. Screw or Bolt
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DIY Enclosure, I built this as a lid rest for the back of my enclosure, and thought it was also a good spot for the PFTE tubes top pass through.
There is just enough distance to tighten down the connectors for the pass through to stay rigid and work effectively.
Screw or bolt through your enclosure, I used a 4 mm Bolt, length depends on your enclosures thickness. Top part of rest is 1 1/2" thick, Bottom is 13/64" thick
All I have to do now is make a cut out around the PFTE holes of my lid.