U-Lock Holder for Ninebot G30LD e-scooter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
U-Lock Holder consisting of 4 parts. Fits perfectly on the unusual profile of the vertical steereing bar of the G30LD.
- Ocena
- 4,75 / 5
- Polubienia
- 62
- Pobrania
- 508
- Wydruki
- 3
- Wyświetlenia
- 5399
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Update03:
Added Bracket for heat inserts M3x4x5mm.
Update02:
Added bottom hook for U-LOCK - ULTRA COMBO 245/153C.
Update01:
Addetd top hook for 25mm thick shackles with inner Diameter 100mm.
Since theft protection is an important issue for e-scooter owners, I decided to use a U-lock.
This cannot be quickly cut with a bolt cutter or pliers.
Unfortunately, the holder supplied was not suitable for the egg-shaped cross-section of the handlebar.
I therefore took the trouble to construct a suitable holder that fits perfectly to the vertical handlebar.
Dimensions of the U-lock:
Bar thickness: max. 15mm
Shackle width: min. 65mm
Thickness of lock bar: max. 37mm
Required mounting material:
8 pieces M3 nuts
8 pieces M3x16 cylinder head screws
Print data:
0.3mm layer height (or less)
Vertical shell, 3x permimeters (or more)
Infill 50%
Optional to increase stability
Cylindrical 100% Infill modifier around the screw holes (seee Pictures).
Have fun! Do not hasitate to ask questions.