FigStack - Minifigure Storage Box with Gridfinity Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small stackable storage (or display) for single minfigures with Gridfinity adapters
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
FigStack
The most minimal version consist of the a frame and a top lid. The top lid attaches to the frame via the four corner studs on the frame.
The minfigure can be attached to the avaiable studs inside the frame.
Stacking
Using the studs, the FigStack boxes can also be stacked vertically, either directly frame to frame or with the top variant with studs.
Enclosing
To enclose the FigStack box you can slide in the side panels at the front and back. If you are able to cut arcylic sheets, 1mm thick 25mm x 47mm arcylic sheets can work as side panels too for transparency.
Gridfinity
To use FigStack boxers within the Gridfinity system there are Gridfinity adapters for the bottom and top. The FigStack box is one Gridfinity grid in size and the height with the adapters is 8U in standard Gridfinity units, with the stacking lip on top.
Modularity
With the studs at the top of the frame and the stud holes at the bottom of the frame, FigStack can be extended with different attachments, like the Gridfinity adapters. I would love o hear you ideas on what other attachments/adapters might be useful.