Gridfinity Collet Holder Collet-ction by Zack Freedman
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repost of Zack's Gridfinity CNC collet storage box collet-ction.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 298
- Wydruki
- 2
- Wyświetlenia
- 1804
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
CNC collet storage blocks for the Gridfinity modular workshop storage system - they're both ER11 for now.
Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at https://bit.ly/3E2NxnZ
Parametric source files:
- Stupid Version: https://a360.co/3JznS7x
- Non-Stupid Version: https://a360.co/3M0PDar
These bad boys hold CNC collets - I only have an ER11 Snapmaker, so that's what ya get.
The stupid version holds collets in their little yellow boxes.
The non-stupid version holds the collets without the boxes.
There's no reason to use the stupid version. Just remember to keep the collets nice and oiled to prevent rust.
Gridfinity Tips!
- No brims or support required!
- Use any filament with an 0.6mm or smaller nozzle.
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.