1 / 3
Handbrake sim racing for fanatec base (diy fanatec clubsport handbrake v2) — zdjęcie 1
1 / 3

Handbrake sim racing for fanatec base (diy fanatec clubsport handbrake v2)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

diy fanatec clubsport handbrake v2

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Share Alike

Français

Frein à main pour sim racing sur base fanatec

Pour pouvoir l'utiliser comme un fanatec clubsport handbrake v2, il vous faudra une prise rj12 et un potentiomètre 10kΩ que vous devrez raccorder comme cela:

+5v : rj12 pin 1 -> potentiomètre patte gauche (fil rouge sur la photo)

Signal : rj12 pin 2 -> potentiomètre patte du milieu (fil vert sur la photo)

GND : rj12 pin 5 + pin 6 -> potentiomètre patte droite (fil blanc sur la photo)

Pour la numérotation des pin de la prise rj12, quand on la tient de face, languette ver le haut (comme sur la photo), la pin la plus à droite est la pin 1 et celle la plus à gauche la pin 6.

Il vous faudra deux roulements à bille 4*13*5mm (-624ZZ) et un ressort de traction 1.2x12x100mm pour le levier, et aussi trois vis M4x30mm et trois écrous frein M4

Le boitier est aussi prévu pour pouvoir accueillir un microcontrôleur arduino pro micro pour en faire un frein à main en usb utilisable sur PC.

Pour le câblage et la programmation du microcontrôleur vous pouvez voir le modèle sur lequel ce frein à main est basé.

J'ai imprimé ce modèle sur une Anycubic kobra S1 en abs (elegoo abs pro) avec un remplissage de 100%, environ 9h d'impression pour environ 200g de filament

Prise rj12: https://fr.aliexpress.com/item/1005010410226609.html?spm=a2g0o.order_list.order_list_main.20.4df65e5b5m4AsI&gatewayAdapt=glo2fra

Potentiomètre 10kΩ: https://fr.aliexpress.com/item/1005006271589247.html?spm=a2g0o.order_list.order_list_main.5.4df65e5b5m4AsI&gatewayAdapt=glo2fra

Roulements à billes: https://www.amazon.fr/Swpeet-tailles-dassortiment-roulements-profonde/dp/B0DQNGRL3R/ref=sr_1_6?crid=3GY23L3G6YNVW

Ressorts: https://www.amazon.fr/traction-Diam%C3%A8tre-ext%C3%A9rieur-inoxydable-extr%C3%A9mit%C3%A9/dp/B0D1N3DKYJ/ref=sr_1_5

Modèle de base: https://www.thingiverse.com/thing:6836194

English

Handbrake for sim racing based on Fanatec

To use it as a Fanatec Clubsport Handbrake v2, you will need an RJ12 connector and a 10kΩ potentiometer, which you must connect as follows:

+5V: RJ12 pin 1 → potentiometer left terminal (red wire in the photo)

Signal: RJ12 pin 2 → potentiometer middle terminal (green wire in the photo)

GND: RJ12 pin 5 + pin 6 → potentiometer right terminal (white wire in the photo)

Regarding the pin numbering of the RJ12 connector: when held face-on with the tab facing upwards (as shown in the photo), the pin furthest to the right is pin 1 and the one furthest to the left is pin 6.

You will need two ball bearings 4*13*5mm (-624ZZ) and a tension spring 1.2x12x100mm for the lever, as well as three M4x30mm screws and three M4 lock nuts

The casing is also designed to accommodate an Arduino Pro Micro microcontroller, enabling it to function as a USB handbrake compatible with a PC.

For the wiring and programming of the microcontroller, please refer to the model on which this handbrake is based.

I printed this model on an Anycubic Kobra S1 using ABS (Elegoo ABS Pro) with 100% infill; it took approximately 9 hours to print, using around 200g of filament.

RJ12 connector: https://fr.aliexpress.com/item/1005010410226609.html?spm=a2g0o.order_list.order_list_main.20.4df65e5b5m4AsI&gatewayAdapt=glo2fra

10kΩ potentiometer: https://fr.aliexpress.com/item/1005006271589247.html?spm=a2g0o.order_list.order_list_main.5.4df65e5b5m4AsI&gatewayAdapt=glo2fra

Ball bearings: https://www.amazon.fr/Swpeet-tailles-dassortiment-roulements-profonde/dp/B0DQNGRL3R/ref=sr_1_6?crid=3GY23L3G6YNVW

Springs: https://www.amazon.fr/traction-Diam%C3%A8tre-ext%C3%A9rieur-inoxydable-extr%C3%A9mit%C3%A9/dp/B0D1N3DKYJ/ref=sr_1_5

Base model: https://www.thingiverse.com/thing:6836194