Interference and diffraction laser kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We designed a low cost modular assembly using an inexpensive laser pointer to study interference and diffraction in…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
We designed a low cost modular assembly using an inexpensive laser pointer to study interference and diffraction in introductory physics. This was in response to our desire for the students to have a hands-on laboratory experience during the COVID-19 lock-down.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament: Generic PLA Any
Notes:
PRUSA slicer settings: Print settings: 0.20mm SPEED, Filament : generic, infill 20%
2 walls, 3 top and 3 bottom layers.Slides are printed flat on the bed. Include skirt / brim to prevent corners from lifting up.
Post-Printing
We used 0.015 diameter music wire from K & S metals for the wire slide. Wire was cut to length and a drop of super glue in each of the two small wells was used to secure the wire to the slide.
Category: Physics & Astronomy