Nerf Rayven Switch Upgraded Rev Switch Mounting Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting plate that allows straightforward installation of an upgraded rev trigger switch in the ideal location.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When Luke built a Rayven, much like the Stryfe and Nemesis, he wanted a customized switch plate. The Rayven 3d Printed Switch Mounting Plate is designed for the Nerf Rayven. It allows for straightforward installation of the rev trigger for ideal switch placement. This is intended for our 21A/15 Omron switches but should work with any long lever 15/16/21A microswitch of similar size. You'll need to trim a bit of plastic in the shell.
Drop in and glue in place with virtually any glue. The plate is tight enough to skip glue altogether (though this is not the recommended usage).
FEATURES:
• Total installation takes about 30 seconds!
• This saves a lot of putty work and time
FILES INCLUDED:
• 1 Bambu Studio 3MF File with saved print settings
RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: 5 wall loops