A4T Cowling Variations for BDpressure (Dragon, Dragon UHF, Rapido UHF, TZ V6 2.0)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are remixes of some A4T cowlings to make them compatible with the BD Pressure sensor.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 798
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
the BD Pressure sensor is a strain guage that sits between the hotend and the hotend mount. This allows the sensor to measure extruder pressure. By measuring this you can automatically calibrate PA live. The sensor requires 6mm of additional space to sit between the hotend and the cowling. Depending on the hotend I either added or removed mass to accommodate the sensor. In the case of the TZ V6 2.0 hotend I started with The rapido cowling, since the total length of TZ + BD Pressure is very close to the Rapido length, and added only .5mm of extra thickness. For the other cowlings it required reducing thickness of the mounting area. I should also note that the part for the TZ is designed around a standard V6 hotend which sticks out a bit further than the nozzle it ships with.
I have assembled the TZ version and I can confirm that it all fits together correctly. I originally created the other versions for some discord users and heard back that it worked well for them.
I can pretty easily create other variations if people are interested.