Opossums!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here's a pack of Opossums I've sculpted for Tabletop Miniature use, or whatever you feel like!
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 59
- Wydruki
- 2
- Wyświetlenia
- 189
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here's a pack of Opossums I've sculpted for Tabletop Miniature use, or whatever you feel like!
Contains:
-Opossum (Mouth Open)
-Opossum (Mouth Closed)
-Opossum wearing a pack (Mouth Open)
-Opossum wearing a pack (Mouth Closed)
-Opossum twisting and screaming
-Opossum twisting and screaming (with flag)
-Tiny little baby Opossum (really small, best printed in resin or with a 0.2mm nozzle. Glue them onto the bigger ones if you want!)
-NEW: A momma Opossum covered in 4 little Opossuminos
With the exception of the Little Opossum model, all of them are sized to fit on a 1 inch round (25.4mm) base.
If you liked this model and want to show your thanks, you can buy me a coffee!
Or, check out my paid model shop, which helps support me even more!
If printing at the given tabletop scale, I suggest using a 0.2mm nozzle and 0.08 layer heights if possible for the best detail fidelity. If you'd like to print larger for desk decor, 200% scale or larger is perfectly fine with a 0.4mm nozzle at 0.12 mm layer heights. As always with organic models, use Arachne instead of Classic.
I've had best luck with Tree Slim autosupports, and manually printing a large brim ear all around the tail (they have a habit of coming loose just as they join with the main model)