Spacemouse Ergo Remix w/Satechi Keypad Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacemouse Ergonomic remix adding a Satechi bluetooth Stand
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The OG Spacemouse (bluetooth model) ergonomic remix with added Satechi Stand.
The basic print with the OG Ergo (plate #1) with Palmrest (plate #4), the Spacemouse retainer plate takes self tapping 3x10mm screws.
The added plates are for a Satechi Bluetooth Keypad mount. Plate #2 is an extended base to secure it to the Ergo. If using this setup, the Keypad Stand won't require the lower part of the stand as it'll screw to the Extension directly.
Notes. I added grippy rubber to the bottom so it doesn't slide around. The screws were 8x basic 3x10 self tappers, using 4x countersunk for the Keypad mount plate. The Palmrest is optional, I printed it in foaming TPU but you can cut it out of whatever soft material you like.