Virtue Nozzle Brush and Park Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parking and cleaning setup for the Virtu E3 2WD Printer
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 257
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Virtue Nozzle Brush and Park Pad
###### Please post your Makes ######
Please like this, download and post the make if you built it
It helps us makers with feedback and gets us some Prusa meters as most people don't pay it forwardFeel free to help my projects continue https://ko-fi.com/gcodegearhead
The video can be seen here Youtube
Intro & Instructions
I needed a nozzle scrubber to ensure the Carto V4 tap is always accurate / successful.
It needed to fit within the very tight confines of the printer allowable travel and needed macros to support it.
Update Log
DATE | Info |
|---|---|
21-JUN-2026 | Initial Release. |
BOM
Part | QTY |
M5 x 10mm SHCS | 1 |
M3 x 10mm BHCS | 2 |
RTV Silicone | A/R |
Carto supplied or A1 Mini Silicone Brush | 1 |
Assembly Instructions
Print the parts as oriented. No Supports required
I used 0.2 layer height with 4 walls 15 % 3D Hexagon
Squeeze the RTV into the gap so it fills up the space and then over fill a little as you will take a knife and cut it back. Let it cure for stipulated curing time and then slice the extra back to the profile of the print as seen in the first photo in this printable.
Stick the silicone brush centered to the silicone pad longitudinal axis
Assemble the M3 screws as per below section view.
Assembly position in relation to tool head
It is VERY important to set this as per the picture, you risk a hard crash with the cooling ducts.
Start too low and then work up. Nozzle should sit on the pad and ducts should clear the silicone brush.
