1 / 4
Battle Top with Gear Box 2X speed Spinning Mechanism — zdjęcie 1
1 / 4

Battle Top with Gear Box 2X speed Spinning Mechanism

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Battle Top with Gear Box 2X speed Spinning Mechanism

Ocena
5 / 5
Polubienia
16
Pobrania
45
Wydruki
2
Wyświetlenia
362
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

   This is new original mechanism, that works perfect.

This is a battle spinning top with interchangeable blades. It features a dedicated launch mechanism with a built-in gearbox. Thanks to its 1:2 gear ratio, the top's rotational speed is doubled. Movable wheel locks top when rack is in, this prevents to top fall down.

The entire design is easy to 3D print, and all parts can be printed in PLA. The spinning top itself should preferably be printed with 100% infill (to maximize its mass). The gearbox gears are best printed in PETG for improved durability and wear resistance.

The model comes with a set of simple blades, including versions with built-in moving parts.

  •  The snap-lock mechanism prevents the spinning top from falling out when it is lifted upward.

  • The gear wheels and pulling rack were designed according to standard engineering specifications from a technical catalog (module 0.8 for plastic material wheels: OD=11.2 mm, OD=20.8 mm).

  • The twist-lock system securely holds the blade in place during operation.

  • The blades include moving parts that require no assembly, as everything is printed in one piece.

 

   Printing:

This is most economical way to print top, for top's upside no need for supports (if you place high quality printing: layer 0.08 or 0.1 - no supports needed for top's upside only for top's bottom in thread hole)

other part's no supports needed

blades also could be printed without supports at all

Custom build blades:

     The top features a simple threaded connection, allowing you to create and use your own custom blades and combine number of blades together.

all you need is hole diameter at least 20.6 mm

blade thickness between 2 - 12 mm

Size:

Cord length 273 mm

Blade dimeter 91 mm

Blade height from ground 25 mm

Tagi