Project Silverfish Eather-Flux Detector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full scale model of Eather-Flux Detector from Project Silverfish with some minor tweaks. Parts are separated by color.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
About this model
This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available.
It is not 100% accurate in details, but proportions are true to original. It requires glue. You may choose either to paint the model or print in different colors.
Preview
Note
Front and top knobs can be rotated if not glued in too much. You should notice here yellow and peach parts that can be fit together to form a rotating joint. Be careful with glue.
There are two variants of the antenna. If you wish to print only one of them remember to disable parts of other on their plates (antenna_X_wire on plate 3, antenna_X_cap and second antenna_base on plate 4).
The antenna can be removed for ease of storage or to swap between variants. Here you can see white part (antenna base) should be held in place by friction (in cap part). Be careful to avoid gluing it.
Assembly
WIP