Mainstays 28" Tower Fan Horizontal Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to have my tower fan horizontal on a small dresser next to the bed rather than vertical.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
Mainstays (Walmart) 28" Tower Fan. Vertical orientation works great when I'm vertical. But what about when sleeping? I wanted to try having the fan horizontally matching my horizontal position when sleeping. The idea is that this would provide a wide swath of blown air rather than a vertical blade of air. I tested the idea by just lying the fan horizontally on the dresser and was please with the results.
Print 2 of these to mount one on each end of the fan. The groove is for a large heavy-duty zip tie if you feel it's necessary. Of course, remove the base (or just don't install the base when removing from the box) so that both ends rest on the same plane. Make sure the oscillation function is turned off.
Of course there are additional options now that the general clamp shape is designed. Could easily add a back plate and mount or hang the fan horizontally on/over a headboard. Use as a floor fan to keep the low cool air circulating, etc...
Suggesting printing without support, or only from build plate only, as the internal ziptie tunnel would be nearly impossible to clean out the support material. The recessed area is where the head and tail of the ziptie meet so that there's a finished exterior appearance without a visual ziptie "knot".