Headphone hanger for IKEA BEKANT table
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headphone hanger for IKEA BEKANT table, or any other 17mm tabletop.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A headphone hanger that fits on IKEA BEKANT table without screws (or any other tabletop with 17mm of width), and from my experience does not fall off. There are two versions included, one just for the headphones, and another one with an option to roll and hide some of the cable, which is something I find essential. The cable cap has 4 in/out holes for the cable to enter and leave.
The hanger supports headphones with a headband width of 45mm.
In case you need a version for a different table thickness, feel free to use the included fusion project file. The project includes a number of parameters to change:
the table thickness;
depth over/under the table;
the width of the headband of the headphones;
height of the holder under the table.
Printed in PETG with 3 walls and 15% infill. PLA should work just as well.