Prusa i3 MK2/MK2S/MK3 Webcam (Fish Eye) support and Strain relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I mixed together various 'things' I found on Thingiverse and created this universal support platform.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 785
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I mixed together various 'things' I found on Thingiverse and created this universal support platform. Credits to the original designers!
This is a support platform to fix various 'things' to your X-motor and acts as strain relief for the X-motor cables as well. Since it is attached to your X-motor, it moves up and down with the Z-height. It is a universal platform meant to fix Webcam's but maybe you'll have another use. I have added two designs for Webcams:
- one for a Fisch Eye / Wide angle Raspberry Pi camera
one for a Logitech E35 camera
If you have another camera; you can easily design a fixture yourself, a plain support design is included as a starter.The platform can be screwed with a spare M3 bolt/screw directly onto the spare hole on the X motor. You will need two M3 6mm screws / bolts to screw the camera support to the platform. The cables coming from the X motor can be secured with a zip-tie to the strain relief.
UPDATE 27-05-2018: added a version (V2) which moves the camera approx 30 mm away from the z-axis - to have a better overall view on the build plate
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: No
Resolution: 0.15
Infill: 20%