Anywhere Mount for Magic Arm Camera Gear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A heavy-duty mounting point that lets you add a standard 1/4"-20 threaded mount anywhere you need one.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Anywhere Mount for Magic Arm Camera Gear
Add a 1/4"-20 Mount Anywhere
If you've ever needed to attach a magic arm, camera accessory, monitor, light, wireless receiver, tablet holder, or other production gear but had no convenient mounting point, this is the solution.
The Anywhere Mount creates a strong, permanent 1/4"-20 mounting point on virtually any flat surface. Mount it to desks, FOH furniture, rack cases, road cases, workbenches, carts, production furniture, studio walls, or custom projects.
The design uses a brass heat-set insert for the threaded connection and reinforced internal ribbing to distribute load through the entire body of the mount.
I've personally printed these in PETG-CF and used them with magic arms and production gear with excellent results.
Features
* Standard 1/4"-20 threaded mounting point
* Designed for magic arms and camera accessories
* Reinforced ribbed internal structure for strength
* Uses a brass heat-set insert
* Compact footprint
* Four mounting screws for secure installation
* Support-free print
* Great for permanent or semi-permanent installations
* Clean, professional appearance
Print Notes
Material: PETG, PETG-CF, ASA, or ABS recommended
PETG-CF: Tested and recommended
Walls: 8 walls recommended
Infill: 60% Gyroid
Supports: None required
Orientation: Print flat as provided
Installation
1. Print the mount
2. Install a 1/4"-20 brass heat-set insert
3. Secure the mount using Three screws
4. Thread in your magic arm or accessory
Use Cases
* Magic arm mounting points
* Camera accessory mounts
* Field monitor mounting
* Stream Deck mounting projects
* Wireless receiver mounting
* Tablet and phone holders
* Broadcast workstations
* FOH desks
* Audio console furniture
* Road cases and rack cases
* Studio workstations
* Production carts
* Custom AV installations
Compatible Hardware
Designed around standard:
* 1/4"-20 brass heat-set inserts
* Magic arms
* Camera accessories
* Monitor mounts
* Photography and video equipment
Most gear using standard 1/4"-20 threads will work.
Files Included
STL (ready to print)
STEP (for compatibility)
3MF (for direct print)
Designed for functional use in live environments.
Feel free to modify or adapt for your own setup.
Designed by Jesse @ freejoy.club