1 / 7
Prusa i3 MK2/MK2S/MK3 Filament Guide with reces for cables / wires — zdjęcie 1
1 / 7

Prusa i3 MK2/MK2S/MK3 Filament Guide with reces for cables / wires

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wrodz designed this filament guide: https://www.thingiverse.com/thing:2341182 - all credits to him.

Ocena
5 / 5
Polubienia
12
Pobrania
165
Wydruki
2
Wyświetlenia
1375
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Wrodz designed this filament guide: https://www.thingiverse.com/thing:2341182 - all credits to him.

I just added a few things to make it fit for my application:

  • added a reces on the back side, since I have some wires running there for the lights
  • added a very thin wall to the open loop: my first attempt printing this one failed, since the small piece at the open end got loose from the bed and ruined the print. With this version you can print is well and easily cut away this thin wall if you want to have the loop open, if not, leave it as it is
  • added a small notch such that it really snaps onto the frame and that the guide does not move
    While at it, I made 3 versions:

  • Open version with the reces and snap-notch

  • "Closed" version with thin wall, reces and snap-notch
  • Closed version for a 4 mm PTFE tube - this version I use in my enclosure
    They fit perfectly on my MK2S and MK3

Print instructions

Category: 3D Printer Accessories Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: No

Supports: No

Resolution: 0.15

Infill: 40%

Notes:

Printed the versions on the picture in Prusa Orange ABS

Tagi