1 / 5
Sony Alpha Auto-Lock Hot Shoe Cover/Cap (a57, a77, a65, a55, a37) — zdjęcie 1
1 / 5

Sony Alpha Auto-Lock Hot Shoe Cover/Cap (a57, a77, a65, a55, a37)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lost the proprietary hot shoe cover for your vintage Sony Alpha camera? This is a 3D-printable replacement cap…

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
116
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

Lost the proprietary hot shoe cover for your vintage Sony Alpha camera? This is a 3D-printable replacement cap designed specifically for the unique Sony/Minolta Auto-Lock Accessory Shoe (iISO). It slides perfectly into place to protect the delicate electronic contacts from dust, moisture, and scratches when you aren't using a flash or microphone.

Compatibility This cap is tested on the Sony SLT-A57, but it will perfectly fit any legacy Sony or Minolta camera using the older wedge-style proprietary hot shoe, including:

Sony Alpha SLT Series: a33, a35, a37, a55, a57, a65, a77 Sony Alpha DSLR Series: a100, a200, a300, a350, a450, a500, a550, a560, a580, a700, a850, a900 Sony NEX Series: NEX-7 Many classic Minolta Maxium digital and film cameras.

(Note: This will NOT fit newer Sony cameras with the Multi-Interface Shoe, like the a58, a99, or the modern mirrorless a7 series).

Recommended Print Settings Material: PLA or PETG work great. Layer Height: made and tested for 0.2mm .

Category: Camera

Tagi