1 / 2
Loctite 6ml/0.2oz tube standing base holder and grip — zdjęcie 1
1 / 2

Loctite 6ml/0.2oz tube standing base holder and grip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand-up base collar and knurled grip for Loctite 6ml/0.2oz tubes.

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

I got tired of the tiny Loctite tubes not having a flat base to set on a workbench while applying it to mnultiple bolts. This lets you do that, and also gives you a bit of grip for careful application.

Slide the top of the tube into the bottom of the part, and pull through until it basically locks in.

Print at any settings, more or less. Mine are whatever random PLA brand on an MK4S with the default 0.20 speed profile. I do recommend printing in red/blue/green so you can tell what color Loctite it is at a glance.

Tagi