Gardena-Compatible Hose Quick Connect Fitting — O-Ring Seal, Remixable | STEP File Included
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable quick connect hose fitting modeled after the Gardena standard connector system.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
A printable quick connect hose fitting modeled after the Gardena standard connector system. Geometry is slightly modified from the original to improve printability while maintaining full compatibility. Tested with garden hose pressures on a 19mm hose.
Designed as a remix base — the STEP file is included so you can design your own nozzles and accessories that snap directly onto any Gardena-compatible connector.
What's included:
Basic fitting
Fitting with cover ring
Example nozzle
STEP file for remixing
Hardware Required:
1x O-ring, 2.5x10mm — required for a proper water seal
Compatibility:
Tested with Gardena quick connect system. Other manufacturers using the standard should be compatible but tolerances may vary — leave a comment if you need adjustments for a specific brand.
Critical print note:
Print models exactly as oriented in the render. The locking ring height is tolerance sensitive — too high and it won't lock, too low and it won't fully open auto-stop connectors. Do not rescale this model.
Print Settings:
Material: ABS recommended for outdoor/UV exposure. PLA works for occasional use
Walls: 3 minimum
Infill: Cubic
Supports: No
Layer height: 0.2mm
For use with garden hose pressure only. Not suitable for compressed air or high pressure systems.