Filament Dehydrator / Dryer Tray Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Walter made two nice extensions for a standard food dehydrator / -dryer to convert it into a small filament dryer /…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 1355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Walter made two nice extensions for a standard food dehydrator / -dryer to convert it into a small filament dryer / dry oven, as can be found here: https://www.thingiverse.com/thing:2853136
However.... my Prusa MK3's bed is not large enough to print these in one piece. Hence I cut the 100 mm extension up in 4 pieces that you can glue together.
Walter has a small Westinghouse food dehydrator and I have a EUR 30,99 "VidaXL" private label and it fits perfectly (approx diameter = 24.5 mm). Maybe there are more 'cheap' food dryers that have the same dimensions.
This will allow you to dry 1 Kg spools.
Print instructions
Category: 3D Printer Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.15 or 0.20
Infill: 0%
Notes:
Suggest to set 3 perimeters and zero infill. Needs just a little support (set support generation such that only the overhang of the overlapping piece gets support - approx 8mm high only).