Peakabrew WDT — Normcore Needles Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to use Normcore Needles on Peakabrew WDT Distribution Tool
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
There is no way to find replacement needles for this specific distributor tool. So when they break, you're just out of luck on getting this to work. But there are plenty of needles for normcore tools.
Print with 0.25mm nozzle. You might need to fine-tune parameters (e.g. the Z-offset) so the small holes will not be closed.
On the first picture you can see the original needle, then normcore needle, and then the full assembly (new adapter plus the new set of needles).
On the second picture there is an original needle holder, and a new needle holder (adapter) to hold normcore needles.
Just in case (if someone wants to make an alternative version), the thread size is M14 with 1mm pitch.